Armi da fuoco e accessori

AK47 Medium Slick Handguard M-LOK The Clawgear AK47 Medium Slick Handguard is the mid-length version of the modular handguard series for AK platforms with stamped or milled receivers. It provides a balanced combination of mounting space, structural stability, and overall weight, making it ideal for users seeking both versatility and weapon handling performance. Machined from high-strength 6061 aluminum and MIL-SPEC Type III hard anodized, the handguard offers excellent durability with reduced weight. The matte, non-reflective surface minimizes light signature. The integrated M-LOK system enables direct attachment of accessories like Picatinny rails, grips, or lights. A QD sling mounting point is integrated into the rear section. This medium-length version offers an ideal compromise between maneuverability and accessory mounting area—suitable for both tactical and dynamic shooting applications. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length263 mm Weight250 g

AK47 Short Slick Handguard M-LOK The Clawgear AK47 Short Slick Handguard is the most compact model in the modular handguard series for AK platforms with stamped or milled receivers. It is designed for applications that require low weight, a short front-end profile, and enhanced weapon maneuverability – such as CQB environments or confined operational spaces. Machined from high-strength 6061 aluminum and hard anodized to MIL-SPEC Type III, the handguard offers excellent durability with minimal weight. The matte, non-glare surface reduces unwanted reflections. The integrated M-LOK system allows mounting of various accessories such as Picatinny rails, vertical grips, or lighting tools. A QD sling attachment point is integrated into the rear section. The shortened design reduces overall weapon weight and front-end load, making it ideal for fast target acquisition and dynamic shooting situations. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length160 mm Weight160 g

AUG M-LOK Handguard The Clawgear AUG M-LOK Handguard is designed for professional users who demand maximum modularity, low weight, and high durability on the AUG platform. Machined from high-strength aluminum and hard anodized to MIL-8625-F Type III, Class II, it offers outstanding structural integrity while remaining lightweight – ideal for operational use under harsh conditions. With full M-LOK compatibility across 12 mounting positions, the handguard supports mission-specific accessories such as vertical grips, lights, IR modules, and lasers. Its slim, ergonomic design improves weapon control and remains fully functional when used in combination with suppressors, compensators, or flash hiders. For flat top AUG configurations, the Clawgear AUG A3 Top Rail is required to ensure full compatibility. Technical Specifications TypeFree-floating handguard Material6061 aluminum, MIL-8625-F Type III, Class II hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible, 12 mounting slots ErgonomicsOne-piece low-profile design for enhanced control Length138.4 mm Width56 mm Height47 mm Weight142 g ColorBlack (hard anodized) CompatibilitySteyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG SA, AUG LMG, MSAR STG-556Not compatible with: AUG A3, AUG Z A3, AUG 9mm, AUG A3 SA POLICE/SWAT

AK47 Gas Tube Cover The Clawgear AK47 Gas Tube Cover is a functional enhancement for use exclusively with the Clawgear AK Slick Handguard. It protects the gas tube while adding a MIL-STD 1913 / STANAG 4694 Picatinny top rail, enabling the mounting of IR devices, lights, or backup sights in line with the bore. Manufactured from high-strength aluminum and MIL-SPEC Type III hard anodized, this cover offers maximum durability with minimal weight. The matte black finish reduces unwanted reflections, supporting tactical use in variable lighting conditions. Mounts securely with guided fit when combined with the Clawgear AK Slick Handguard. Note: This component is only compatible with the Clawgear AK Slick Handguard. It cannot be used standalone. Technical Specifications TypeGas tube cover with Picatinny top rail MaterialHigh-strength aluminum, MIL-SPEC Type III hard anodized FinishMatte black, anti-reflective, corrosion resistant Mounting InterfacePicatinny (MIL-STD 1913 / STANAG 4694), top CompatibilityOnly usable with Clawgear AK Slick Handguards Weight80 g Length100 mm Width34.6 mm Height37.5 mm

Flip-Up Sight Set The Clawgear Flip-Up Sight Set is a folding mechanical sight system for weapon platforms with continuous Picatinny rails. It is in operational use with law enforcement and military users in multiple countries and was designed for maximum reliability, ruggedness, and ease of use. Both front and rear sights are precision-machined from high-strength steel and finished with a non-reflective, light-absorbing surface treatment. When folded, the sights sit low-profile and remain unobtrusive during transport or storage. They can be deployed quickly and adjusted without tools—elevation at the front, windage at the rear. Compatible with MIL-STD-1913 and STANAG 4694 rail systems, the set fits all standard platforms. Technical Specifications TypeMechanical flip-up sight (front and rear) PlatformMIL-STD-1913 / STANAG 4694 Picatinny MaterialHigh-strength, corrosion-resistant steel FinishNon-reflective, light-absorbing hard coating AdjustmentTool-free – front elevation, rear windage FunctionFolding, locking, low-profile when stowed CompatibilityAll common platforms with continuous Picatinny rail Dimensions & Weight ModelWeightLengthWidthHeight Front Sight59 g53 mm35 mm38.6 mm Rear Sight71 g46.5 mm38 mm40.5 mm

SOF Compensator – 1/2"-28 UNEF The Clawgear SOF Compensator was developed for AR15 platforms to improve weapon control in demanding operational environments. It significantly reduces recoil and muzzle rise, providing better control and precision—especially during rapid fire and dynamic engagements. The closed bottom prevents dust signature during prone shooting, while the expansion port geometry vents gases upward and to the sides, maintaining muzzle stability. Manufactured from hardened high-strength steel, the device is built to withstand extreme thermal and mechanical stress. A key feature is the integrated breacher spike front, allowing forced entry through doors or barriers in CQB operations. Installation is done using the included crush washer and a 19 mm wrench. The A2-compatible interface allows attachment of NATO QD suppressors such as the B&T Rotex V or Steyr UMS. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm CompatibilityAll AR15/M16 platforms with 1/2"-28 UNEF (not compatible with OA-15) FeaturesClosed bottom, expansion port, breacher spikes, A2-compatible (QD-ready) InstallationMounted with crush washer, 19 mm wrench required

Blast Forward Compensator – AR15 The Clawgear Blast Forward Compensator (BFC) is a linear muzzle device specifically designed for AR15 platforms with 1/2 x 28 TPI UNEF thread. By redirecting muzzle gases forward, it significantly reduces side-blast, sound pressure, and gas exposure for the shooter and nearby personnel—especially in confined spaces, CQB environments, or on the firing line. The closed-body design features three consecutive expansion chambers that efficiently mitigate recoil and muzzle rise. Integrated hardened steel breacher spikes provide additional utility in close-quarters applications such as forced entry. The compensator is mounted using the included crush washer, ensuring proper alignment with the bore axis. Technical Specifications TypeLinear Blast Forward Compensator MaterialHardened high-strength steel FinishBlack, corrosion-resistant coating Expansion Chambers3 internal chambers Breacher SpikesIntegrated, hardened steel Thread1/2 x 28 TPI UNEF Caliber.223 Rem / 5.56 x 45 mm NATO CompatibilityAll AR-15 / M16 variants with matching thread (e.g. Hera Arms The 15th, Schmeisser AR15, DPMS AR-15); not compatible with OA-15 InstallationVia included crush washer, tighten using 19 mm wrench or dedicated tool

AUG Heatshield M-LOK The Clawgear AUG Heatshield is designed as an accessory for the AUG M-LOK Handguard. During rapid fire, the gas block of the AUG can become extremely hot. This heatshield protects the user from accidental burns caused by direct contact and hot escaping gases—enhancing safe weapon handling. Made from high-strength aluminum and MIL-SPEC Type III hard anodized, the heatshield combines outstanding durability with minimal weight. It attaches directly to the M-LOK interface of the handguard and can be removed just as easily when not needed. Technical Specifications TypeHeatshield for gas block MaterialHigh-strength aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-reflective, corrosion-resistant Mounting SystemM-LOK compatible CompatibilityOnly compatible with Clawgear AUG M-LOK Handguard Weight27 g

M-LOK QD Mount – Anti-Rotation The Clawgear M-LOK QD Mount – Anti-Rotation provides a secure and compact QD sling attachment point for M-LOK compatible platforms. This anti-rotation version locks the swivel in 45° increments, preventing unwanted movement and offering consistent sling positioning in operational or training environments. Made from high-strength steel using MIM (Metal Injection Molding), the mount features a matte black, corrosion-resistant finish. Its low-profile design and chamfered edges minimize snagging on gear. Stainless steel T-nuts are included for enhanced durability and corrosion protection even under frequent mounting cycles. Note: Compatible with all standard QD push-button swivels. For best performance, we recommend using high-quality components (e.g., Clawgear QD Swivel Stainless, Magpul). Always verify locking by pulling and twisting the inserted swivel to confirm engagement. Technical Specifications TypeM-LOK QD Sling Mount – Anti-Rotation MaterialHigh-strength steel (MIM), stainless steel T-nuts FinishMatte black, corrosion-resistant Mounting SystemM-LOK compatible FunctionAnti-Rotation with 45° locking increments CompatibilityAll standard QD push-button swivels Weight20 g Length31.7 mm Width14.7 mm Height9.5 mm

Flip-Up Rear Sight The Clawgear Flip-Up Rear Sight is a folding mechanical aperture sight with tool-free windage adjustment. Designed for use on AR-type platforms with Picatinny rails, it offers a compact, rugged solution for primary or backup sighting applications. The entire unit is machined from high-strength steel and finished for maximum durability. The sight locks in place when deployed, folds flat when not in use, and is fully compatible with MIL-STD-1913 and STANAG 4694 interfaces. For complete iron sight alignment, it is recommended to use this product in combination with the Clawgear Front Sight. Note: Also available as part of the Flip-Up Sight Set. Technical Specifications TypeFolding rear aperture sight PlatformMIL-STD-1913 / STANAG 4694 Picatinny MaterialHigh-strength, corrosion-resistant steel FinishNon-reflective, light-absorbing hard coating AdjustmentTool-free windage adjustment FunctionLow-profile folding, locking mechanism Weight71 g Dimensions (L x W x H)46.5 x 38 x 40.5 mm

Picatinny QD Mount – Rotation The Clawgear Picatinny QD Mount – Rotation provides a compact, low-profile sling attachment interface for MIL-STD 1913 / STANAG 4694 Picatinny rails. This version allows unrestricted 360° swivel rotation, making it ideal for dynamic sling setups with flexible carry positions. Constructed from high-strength steel using the MIM (Metal Injection Molding) process, the mount delivers excellent durability in a corrosion-resistant, matte black finish. Chamfered edges reduce snagging on gear and improve weapon handling in close quarters. Note: We recommend using high-quality QD sling swivels (e.g., Clawgear QD Swivel Stainless, Magpul) to ensure reliable fitment. Always verify lock-up by pulling and twisting the swivel after insertion to confirm engagement and detect debris or damage. Technical Specifications TypePicatinny QD Sling Mount – Rotation MaterialHigh-strength steel (MIM technology) FinishBlack, corrosion-resistant, matte surface Mounting SystemPicatinny (MIL-STD 1913 / STANAG 4694) Function360° swivel rotation for full mobility CompatibilityAll standard QD push-button swivels (e.g. Clawgear QD Swivels) Weight27 g Length44 mm Width16.8 mm Height10 mm

Snap Cap 9x19mm – 5-Pack The Clawgear Snap Caps in 9x19mm are reusable dummy cartridges designed for safe dry-fire training. They provide realistic simulation of firing cycles without the risk of damaging the firing pin assembly. Thanks to their shock- and oil-resistant polymer body, they protect the weapon during trigger exercises and enable functional training without live ammunition. Ideal for instruction, function testing, and malfunction drills. The spring-loaded impact surface extends service life and makes the Snap Caps suitable for intensive, repeated use. Recommended Applications Improving trigger control Trigger testing without live ammunition Fundamental firearm handling and manipulation Diagnosing and correcting trigger flinch Type 1 malfunction simulation during live drills Technical Specifications Caliber9x19mm Package Content5 pieces MaterialPolymer (shock and oil resistant) CharacteristicsReusable, spring-loaded impact buffer ApplicationDry-fire training, instruction, diagnostics, malfunction drills

AUG A3 Top Rail The Clawgear AUG A3 Top Rail is a high-performance replacement for OEM rails on flat top AUG A3 receivers. Featuring a full-length 30-slot NATO STANAG 4694 Picatinny profile, it allows seamless integration of modern aiming devices such as LPVOs, red dot sights or magnifiers. Machined from high-strength 6061 aluminum and finished with a Mil-Spec Type III hard coat anodizing, the rail offers exceptional strength while keeping weight low. The matte, non-reflective coating minimizes unwanted glare. An anti-rotational QD sling attachment point is integrated at the front end of the rail. Note: This rail is required on certain AUG configurations to allow installation of the Clawgear AUG M-LOK Handguard. Technical Specifications TypePicatinny top rail PlatformSteyr AUG A3 (Flat Top Receiver) Material6061 aluminum, Mil-Spec Type III hard anodized FinishMatte black, non-glare Interface30-slot Picatinny (NATO STANAG 4694) Additional FeatureAnti-rotational QD sling mount (front section) Length443 mm Width21 mm Height22 mm Weight136 g ColorBlack (hard anodized)

Starblast Hybrid Compensator – 1/2"-28 UNEF The Clawgear Starblast Hybrid Compensator combines the functions of flash hider, muzzle brake, and compensator in a single device. This hybrid design effectively reduces recoil and muzzle rise while suppressing flash. The result is improved weapon control during rapid follow-up shots and in tactical environments. Manufactured from high-strength steel, the compensator features structural cutouts for weight reduction. The matte, non-reflective surface finish supports use under varying light conditions. The A2-compatible interface allows direct attachment of standard NATO QD suppressors such as the B&T Rotex V, Steyr UMS, or B&T Blast Deflector. This variant is designed for AR15 platforms with 1/2"-28 UNEF barrel threads and is compatible with all common .223 Rem / 5.56 mm rifles such as Hera Arms The 15th, Schmeisser AR15, DPMS AR-15, or Steyr STM556. Not compatible with Oberland Arms OA-15. Technical Specifications TypeHybrid compensator (brake / compensator / flash hider) MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) InterfaceNATO A2 compatible (e.g. B&T Rotex V, Steyr UMS) Mounting MethodDirect thread installation with 1/2"-28 UNEF Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm CompatibilityAll standard AR15/M16 platforms with 1/2"-28 thread (not for OA-15)

SOF Compensator – M14x1 LH The Clawgear SOF Compensator is specifically designed for AK platforms with M14x1 LH muzzle threads. It reduces recoil and muzzle rise to improve control and precision during rapid fire—ideal for dynamic operations and professional use in CQB scenarios. The expansion chamber directs gases upward and to the sides to stabilize the weapon, while the closed bottom prevents dust signature during prone shooting. The front is equipped with integrated breacher spikes made of hardened steel for forced entry tasks. The body is constructed from high-strength steel with a corrosion-resistant hard coating. Featuring twelve locking notches, the compensator is compatible with most AK-type front sight bases. Installation is done by screwing the device counterclockwise onto the barrel and engaging the retaining pin. Before using a suppressor, ensure the compensator is fully seated and does not move. The integrated NATO A2 interface supports QD suppressors such as the B&T Rotex V. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating ThreadM14x1 LH CompatibilityAK47, AKM, RPK, AK-74 and derivatives with M14x1 LH thread (not compatible with AK-100, AKS-74U, Saiga) FeaturesClosed bottom, expansion port geometry, breacher spikes, A2-compatible, 12 locking notches InstallationScrew on counterclockwise, engage front sight base detent pin

M-LOK QD Mount – Rotation The Clawgear M-LOK QD Mount – Rotation provides a secure and compact sling interface for M-LOK compatible platforms. This version allows 360° free rotation of the push-button swivel, offering maximum mobility and sling freedom in tactical or competitive applications. Manufactured from high-strength steel using the Metal Injection Molding (MIM) process, the mount features a matte black corrosion-resistant finish. Chamfered edges reduce snag hazards, and the low-profile design minimizes interference with the rifle's handling. Stainless steel T-nuts ensure long-term durability—even under repeated mounting cycles. Note: Compatible with all standard QD push-button swivels. For optimal function, use quality components (e.g. Clawgear QD Swivel Stainless, Magpul). Always confirm secure lock-up by pulling and rotating the inserted swivel. Technical Specifications TypeM-LOK QD Sling Mount – Rotation MaterialHigh-strength steel (MIM), stainless steel T-nuts FinishMatte black, corrosion-resistant Mounting SystemM-LOK compatible Function360° swivel rotation for full freedom of movement CompatibilityAll standard QD push-button swivels Weight20 g Length31.7 mm Width14.7 mm Height9.5 mm

M-LOK Picatinny Rail – 7 Slots The Clawgear M-LOK Picatinny Rail with 7 slots is a compact and tactical solution for users who require a lightweight and robust mounting platform. The continuous Picatinny profile complies with NATO STANAG 4694 / Mil-Std 1913 and is fully M-LOK compatible—perfect for mounting lights, switches or laser modules. Constructed from high-strength aluminum and hard anodized to MIL-SPEC Type III, the rail is built for durability. The included stainless steel T-Nuts offer corrosion resistance and allow repeatable installation. Chamfered edges improve handling and reduce snag hazards on gear or clothing. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeM-LOK Picatinny Rail (without QD) Slots7 slots Length3.07″ / 78 mm MaterialHigh-strength aluminum, stainless steel T-Nuts FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), M-LOK compatible Weight31 g IncludedMounting screws & stainless steel T-Nuts FeaturesChamfered edges, corrosion resistant

Blast Forward Compensator M15x1 The Clawgear Blast Forward Compensator (BFC) M15x1 was developed for professional use on platforms with a metric M15x1 muzzle thread – including HK G3, G36, HK416, and OA-10. As a linear-type compensator, it directs overpressure, muzzle gases, and sound straight forward, minimizing exposure for the shooter and nearby team members. This makes it especially effective in confined environments (CQB) and when operating alongside others on the firing line. Manufactured from hardened steel and finished with a durable black coating, the BFC is designed for long service life under harsh operational conditions. Three internal expansion chambers effectively reduce recoil and muzzle rise by optimizing gas redirection. The closed-body design prevents dust and debris from being kicked up when firing from prone positions or on loose terrain. The hardened steel breacher spikes integrated into the front allow for defeating barriers in CQB scenarios and also serve as a secure mounting point using the included tool. The compensator is installed using the supplied counter nut to ensure a tight, secure fit on the barrel. Technical Specifications TypeLinear compensator with breacher spikes Caliber7.62x51 mm / .308 (platform dependent) MaterialHardened steel FinishCorrosion-resistant hard coating (black) Expansion Chambers3 ThreadM15x1 (metric, right-hand) CompatibilityHK G3, G36, HK416, OA-10, and other platforms with M15x1 muzzle thread InstallationUsing supplied counter nut for secure barrel fit FeaturesDirected gas deflection, closed-body design, CQB-capable breacher front

Blast Forward Compensator AR10 The Clawgear Blast Forward Compensator (BFC) AR10 was specifically developed for professional use with rifles chambered in .308 / 7.62x51 mm. As a linear compensator, it directs muzzle gases, overpressure, and noise straight forward, significantly reducing the shooter's exposure and improving comfort in confined spaces (CQB), during team operations, or on the firing line alongside others. Manufactured from high-strength steel and finished with a durable black coating, the BFC offers long service life under demanding operational conditions. Three internal expansion chambers efficiently channel the exhaust gases to reduce recoil and muzzle rise. The closed-body design prevents dust and debris from being kicked up when firing from prone positions or on loose terrain. The front section features integrated hardened steel breacher spikes, allowing the user to forcibly defeat barriers in CQB scenarios or to use the spikes as a mounting interface with the supplied tool. The compensator is installed using a crush washer, ensuring proper alignment on the barrel thread. Technical Specifications TypeLinear compensator with breacher spikes Caliber.308 / 7.62x51 mm NATO MaterialHigh-strength steel FinishCorrosion-resistant hard coating (black) Expansion Chambers3 Thread5/8" x 24 UNEF CompatibilityAR-10 platforms with standard threading (e.g., DPMS LR .308, G2, Daniel Defense DD5, Bushmaster AR-10, S&W M&P10). Not compatible with Oberland Arms OA-10. InstallationCrush washer installation; 19 mm wrench required FeaturesDirected gas deflection, closed design, CQB-capable front with breacher spikes

Flip-Up Front Sight The Clawgear Flip-Up Front Sight is a folding mechanical front post for weapon platforms with a continuous Picatinny rail. Designed for military and law enforcement use, it provides a robust and precise solution for elevation adjustment. Manufactured from high-strength steel with a non-reflective, light-absorbing surface finish, it is built for reliable operation under demanding conditions. The sight folds down to a low profile when not in use and allows tool-free elevation adjustment. It mounts directly to MIL-STD-1913 or STANAG 4694 rail systems. For optimal aiming capability, it is recommended to combine this product with the separately available Clawgear Rear Sight. Note: Also available as part of the Flip-Up Sight Set. Technical Specifications TypeFolding front sight post PlatformMIL-STD-1913 / STANAG 4694 Picatinny MaterialHigh-strength, corrosion-resistant steel FinishNon-reflective, light-absorbing hard coating AdjustmentTool-free elevation adjustment FunctionLow-profile folding, locking mechanism Weight59 g Dimensions (L x W x H)53 x 35 x 38.6 mm

M-LOK Picatinny Rail – 5 Slots The Clawgear M-LOK Picatinny Rail with 5 slots is an ultra-compact mounting platform for tactical accessories on M-LOK-compatible handguards. The Picatinny profile complies with NATO STANAG 4694 / Mil-Std 1913 and is ideal for attaching lights, remote switches, or backup sights. Machined from high-strength aluminum and MIL-SPEC Type III hard anodized, the rail offers outstanding durability. Stainless steel T-Nuts ensure corrosion resistance, even after frequent use. Chamfered edges reduce the risk of snagging on gear or gloves. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeM-LOK Picatinny Rail (without QD) Slots5 slots Length2.05″ / 52 mm MaterialHigh-strength aluminum, stainless steel T-Nuts FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), M-LOK compatible Weight24 g IncludedMounting screws & stainless steel T-Nuts FeaturesCompact design, corrosion resistant, chamfered edges

Keymod Picatinny Rail – 9 Slots The Clawgear Keymod Picatinny Rail with 9 slots is designed for professional users requiring a robust mounting interface on Keymod-compatible platforms. It offers a stable and repeatable interface for tactical accessories such as lights, vertical grips, or laser modules. The Picatinny profile is compliant with NATO STANAG 4694 / Mil-Std 1913. Machined from high-strength aluminum and MIL-SPEC Type III hard anodized, the rail delivers excellent mechanical strength and abrasion resistance. Included stainless steel hardware ensures long-term corrosion resistance—even with repeated use. Chamfered edges reduce snag hazards during dynamic operations. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeKeymod Picatinny Rail (without QD) Slots9 slots Length3.86″ / 98 mm MaterialHigh-strength aluminum, stainless steel hardware FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), Keymod compatible Weight38 g IncludedMounting screws & stainless steel T-Nuts FeaturesChamfered edges, corrosion resistant

Two Chamber Muzzle Brake – 1/2"-28 UNEF The Clawgear Two Chamber Muzzle Brake is designed for AR15 platforms and features a dual-chamber construction to significantly reduce recoil and improve weapon stability. It enhances precision and control during rapid fire in tactical environments. Manufactured from high-strength steel and finished with a non-reflective hard coating, it withstands thermal and mechanical stress. The closed bottom prevents dust signature when shooting prone, and the closed top reduces gas distraction in the line of sight. NATO A2 compatibility allows for use with B&T QD suppressors such as the Rotex-V or Steyr UMS. This version is compatible with AR15/M16 systems using a 1/2"-28 UNEF barrel thread. It is mounted using the included crush washer for precise alignment. Not compatible with Oberland Arms OA-15. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodCrush washer (included) Thread1/2"-28 UNEF Caliber.223 Rem / 5.56 mm FeaturesClosed bottom and top, B&T QD compatible CompatibilityAR15/M16 with 1/2"-28 UNEF (not for OA-15) Length59 mm Diameter21.93 mm Weight85 g

5.56 Extended Magazine Base The Clawgear Extended Magazine Base provides civilian shooters with a practical solution to improve magazine handling while staying compliant with legal 10-round magazine capacity limits. By replacing the floor plate of a PMAG 10 GEN M3 from Magpul, this extension enhances ergonomics, grip, and reloading control – especially under stress or during dynamic drills. Its extended design improves draw from magazine pouches and allows for better control during reloads. Made of fiber-reinforced polymer with 15 % glass fiber content, it offers long-lasting durability for training and competitive use. Note: Not compatible with Clawgear CG15 magazines. Technical Specifications TypeExtension base for 10-round PMAG GEN M3 MaterialPolymer with 15 % glass fiber reinforcement FunctionExtends grip area, improves reload handling CompatibilityMagpul PMAG 10 GEN M3 CapacityRemains compliant (10 rounds) InstallationTool-free floorplate replacement Weight80 g Dimensions (L×W×H)70 × 31 × 105 mm ColorBlack

SOF Compensator – AUG The Clawgear SOF Compensator for the Steyr AUG platform is specifically designed to meet the demands of modern armed forces. It enhances shooting stability by effectively reducing recoil and muzzle rise—ideal for rapid engagements and dynamic operations. The expansion chamber redirects exhaust gases upward and to the sides, while the closed bottom prevents dust signature during prone firing. The hardened steel breacher spikes at the front allow forced entry in CQB scenarios. The compensator is manufactured from high-strength steel with a corrosion-resistant hard coating. Secure attachment is achieved using the included counter nut. Installation involves screwing both the nut and the compensator counterclockwise onto the barrel. The compensator is then slightly rotated back for proper alignment, and the counter nut is hand-tightened and secured with a 19 mm wrench. The integrated NATO A2 interface allows compatibility with QD suppressors such as the B&T Rotex V or Steyr UMS. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHardened high-strength steel FinishCorrosion-resistant hard coating ThreadM13x1 LH (AUG standard) CompatibilitySteyr AUG A1/A2, A3, A3 SF, AUG P, AUG Z (threaded), AUG Z A3 (threaded), AUG LMG, AUG SA, MSAR STG-556, F88 Austeyr, Thales EF88/F90 FeaturesClosed bottom, expansion port geometry, breacher spikes, A2-compatible, mounted with counter nut InstallationScrew counter nut and compensator counterclockwise, align logo, tighten counter nut (19 mm wrench required)

AUG MSM Side Rail – 10 Slots The Clawgear 10-slot Side Rail is a longer variant designed for extended accessory configurations on the AUG Modular Scope Mount. It offers increased space for mounting modular accessories such as IR aiming devices, laser/light combos, or backup optics—ideal for users with more advanced mission-specific requirements. Machined from high-strength aluminum and hard anodized to MIL-8625-F Type III, Class II, the rail provides outstanding resistance to wear and corrosion. Its 10-slot NATO STANAG 4694 interface ensures secure and repeatable mounting for compatible accessories. Technical Specifications TypeSide Rail for AUG Modular Scope Mount Mounting SystemPicatinny (10 Slots, NATO STANAG 4694) MaterialHigh-strength aluminum, hard anodized (MIL-8625-F Type III, Class II) FinishMatte black, corrosion and wear resistant CompatibilityClawgear AUG Modular Scope Mount

Snap Cap .223 Rem – 2-Pack The Clawgear Snap Caps in .223 Remington are reusable dummy cartridges designed for safe and realistic dry-fire training with AR15-style rifles. They protect the firing pin assembly and enable full manipulation drills without the use of live ammunition. Built from oil- and impact-resistant polymer and equipped with a spring-loaded impact surface, these Snap Caps are ideal for instructional use, malfunction simulations, and function checks under real training conditions. Recommended Applications Dry-fire practice and trigger control Reload and malfunction drills Diagnosing shooter-induced errors Safe function checks without live rounds Simulating Type 1 failures under stress Technical Specifications Caliber.223 Rem Package Content2 pieces MaterialPolymer (shock and oil resistant) CharacteristicsReusable, spring-buffered impact surface ApplicationDry-fire, function training, instructional use

Keymod Picatinny Rail – 3 Slots The Clawgear Keymod Picatinny Rail with 3 slots is the most compact version in the series, ideal for mounting remote switches, compact lights, or backup sights on Keymod-compatible handguards. The Picatinny profile follows NATO STANAG 4694 / Mil-Std 1913 specifications. Machined from high-strength aluminum and MIL-SPEC Type III hard anodized, this rail offers outstanding durability at minimal weight. The included stainless steel hardware ensures long-term corrosion resistance, even with repeated mounting cycles. Chamfered edges reduce snag hazards and improve handling. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeKeymod Picatinny Rail (without QD) Slots3 slots Length1.20″ / 30.5 mm MaterialHigh-strength aluminum, stainless steel hardware FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), Keymod compatible Weight18 g IncludedMounting screws & stainless steel T-Nuts FeaturesUltra-compact design, snag-free edges, corrosion resistant

SG553 SOF Compensator The Clawgear SG553 SOF Compensator was specifically developed to meet the operational requirements of modern armed forces. It enhances weapon controllability by effectively reducing recoil and muzzle rise. The closed bottom design prevents dust and debris from being kicked up when firing from prone positions or in unprepared terrain. Its rugged construction from high-strength steel ensures reliable performance under extreme conditions. A key feature is the integrated breacher spike front made of hardened steel, allowing the user to forcibly breach doors and barriers in close-quarters environments (CQB). The internal expansion chamber directs gas pressure upwards and laterally to significantly stabilize the weapon during firing. The compensator is mounted using the included crush washer, ensuring precise alignment with the bore axis. Technical Specifications TypeCompensator with integrated breacher spikes MaterialHigh-strength, hardened steel FinishCorrosion-resistant hard coating ThreadCompatible with SG553 (SIG/Swiss Arms) muzzle thread FeaturesClosed bottom, expansion chamber, breacher spikes InstallationMounted using crush washer; 19 mm wrench required

Snap Cap 12 Gauge – 2-Pack The Clawgear Snap Caps in 12 Gauge offer a safe and realistic way to conduct dry-fire training with shotguns. They effectively protect the firing pin assembly from damage and enable weapon manipulation exercises without the use of live ammunition. The shock- and oil-resistant design ensures long service life under repeated use. Ideal for instruction, reloading drills, and malfunction simulation. The standardized shell dimensions ensure reliable feeding and ejection in compatible pump-action or semi-automatic shotguns. Recommended Applications Dry-fire training with shotguns Trigger discipline without live ammunition Reloading and manipulation drills Diagnosing handling errors Malfunction simulation in training environments Technical Specifications Caliber12 Gauge (12/70) Package Content2 pieces MaterialPolymer (shock and oil resistant) CharacteristicsReusable, spring-loaded impact buffer ApplicationDry-fire, reloading, training, diagnostics

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 Blast Forward Compensator with the crush washer to ensure the correct alignment on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityOberland Arms OA-15InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear Logo faces upwards.

SG553 Blast Forward Compensator The Clawgear Blast Forward Compensator (BFC) is designed for applications where muzzle gases need to be directed strictly forward. It significantly reduces the shooter’s and adjacent team members’ exposure to sound, blast pressure, and powder residues. Particularly suitable for use in confined environments (CQB), on shooting ranges, and during parallel team operations. The BFC features a linear compensator design with three expansion chambers. These guide muzzle gases directly forward to noticeably reduce recoil and muzzle rise. The closed-body construction optimizes the gas flow direction, enhancing user protection. Integrated breacher spikes made from hardened steel allow for barrier penetration in CQB scenarios and serve as a mounting interface for tools. Manufactured from high-strength steel and treated with a durable black surface coating, the BFC is built for long-term use under demanding operational conditions. Compatible with the Swiss Arms SG553 (M14x1 left-hand thread). Technical Specifications MaterialHardened steel FinishBlack coated DesignLinear compensator with three expansion chambers FeaturesIntegrated breacher spikes, closed-body construction CompatibilitySwiss Arms SG553 with M14x1 LH thread ThreadM14x1 left InstallationInstall using the supplied tool or a 19 mm wrench; use of a crush washer is recommended ApplicationCQB, shooting range, team operations

Keymod Picatinny Rail – 7 Slots The Clawgear Keymod Picatinny Rail with 7 slots is a compact accessory platform for use on Keymod-compatible handguards. It features a NATO STANAG 4694 / Mil-Std 1913 compliant Picatinny interface, ideal for mounting lights, remote switches, or lasers. Made from high-strength aluminum and hard anodized to MIL-SPEC Type III, the rail is optimized for durability and corrosion resistance. Included stainless steel hardware ensures long-term reliability even under demanding use. Chamfered edges minimize snag hazards during handling and deployment. Installation Note: Maximum torque: 4 Nm (35 in/lb). If no torque wrench is available, use the short end of the hex key for controlled tightening. Technical Specifications TypeKeymod Picatinny Rail (without QD) Slots7 slots Length3.07″ / 78 mm MaterialHigh-strength aluminum, stainless steel hardware FinishBlack, MIL-SPEC Type III hard anodized InterfacePicatinny (NATO STANAG 4694), Keymod compatible Weight31 g IncludedMounting screws & stainless steel T-Nuts FeaturesCompact form, chamfered edges, corrosion resistant

Snap Cap .308 Win – 2-Pack The Clawgear Snap Caps in .308 Winchester provide a safe and realistic solution for dry-fire training with semi-automatic or bolt-action rifles. They protect the firing pin mechanism and enable functional exercises without live ammunition – ideal for training, hunting preparation, or diagnostics. Made from oil- and shock-resistant polymer with a spring-loaded impact surface, these Snap Caps are built for repeated use in demanding conditions. Recommended Applications Dry-fire and trigger discipline Reloading and cycling drills Malfunction clearing and response Function checks after maintenance Training without live rounds Technical Specifications Caliber.308 Winchester Package Content2 pieces MaterialPolymer (shock and oil resistant) CharacteristicsReusable, spring-buffered impact surface ApplicationHunting, sport shooting, training, diagnostics

Two Chamber Muzzle Brake – M13x1 LH The Clawgear Two Chamber Muzzle Brake is a classic dual-chamber brake designed to significantly reduce recoil and improve weapon stability during rapid fire. It offers enhanced control and precision, making it ideal for dynamic shooting disciplines and tactical applications. Manufactured from high-strength steel, the brake features a closed bottom to prevent dust and debris from being kicked up during prone or low-angle firing. Its black, non-reflective hard coating ensures excellent resistance to thermal and mechanical stress. This variant is designed for Steyr AUG platforms with M13x1 LH muzzle thread. It is installed using the included locking nut, which ensures secure and accurate alignment along the bore axis. Technical Specifications TypeTwo-chamber muzzle brake MaterialHigh-strength, heat-resistant steel FinishNon-reflective hard coating (black) Mounting MethodLocking nut (included) ThreadM13x1 LH Caliber5.56 mm FeatureClosed bottom to reduce dust signature CompatibilitySteyr AUG and compatible platforms Length59 mm Diameter21.93 mm Weight85 g

Snap Cap 7.62x39 – 2-Pack The Clawgear Snap Caps in 7.62x39 mm are reusable dummy cartridges for safe dry-fire training with AK-pattern rifles. They protect the firing pin system and enable realistic drills without the use of live ammunition. Made from impact- and oil-resistant polymer with a spring-buffered impact surface, these Snap Caps are ideal for malfunction simulation, diagnostics, and practical firearm training under realistic conditions. Recommended Applications Dry-fire practice and trigger control Reloading and malfunction clearing drills Identifying and correcting shooter errors Function checks without live ammunition Simulated ignition failures (Type 1) Technical Specifications Caliber7.62x39 mm Package Content2 pieces MaterialPolymer (shock and oil resistant) CharacteristicsReusable, spring-buffered impact surface ApplicationWeapon handling, training, diagnostics

PMAG AUG Legalizer minus 20rds – 3-Pack The Clawgear PMAG AUG Legalizer is designed to temporarily reduce the capacity of a Magpul® PMAG® 30 AUG® Gen M3 magazine to 10 rounds – without any permanent modification to the magazine. It is ideal for shooting ranges, training environments, or sports disciplines with capacity restrictions. Installation is tool-free by replacing the original follower. The glass-fiber reinforced polymer construction ensures durability and reliable feeding performance. Spring and baseplate remain unchanged. Technical Specifications TypeCapacity limiter for PMAG® 30 AUG® Gen M3 CompatibilityMagpul® PMAG® 30 AUG® Gen M3 Capacity ReductionLimits to 10 rounds MaterialPolymer (glass-fiber reinforced) InstallationTool-free, fully reversible Included3 pieces ColorBlack Legal Disclaimer IMPORTANT: The use of this product does not affect the legal classification of a magazine under Austrian or international firearms law. The term “Legalizer” refers only to temporary capacity reduction – e.g. for range or match compliance. The user is solely responsible for observing all applicable laws and regulations. Always verify local legal requirements before use. Trademark Notice Magpul® and PMAG® are registered trademarks of Magpul Industries Corp. Clawgear and TMH Trading GmbH are not affiliated with or endorsed by Magpul Industries Corp. For original Magpul products, visit: www.magpul.com

Starblast Flash Hider The Clawgear Starblast Flash Hider was specifically developed for tactical use under low-light conditions. Unlike muzzle brakes, which primarily reduce recoil, this device is focused on effectively suppressing muzzle flash. This significantly reduces the shooter’s visual signature and makes detection more difficult – especially on short-barreled rifles where flash intensity is typically high. The design features weight-optimizing cutouts that ensure maximum durability with minimal weight. The Starblast series is equipped with a NATO A2-compatible interface and is engineered to align concentrically with the bore axis, enabling precise and repeatable use with suppressors. These characteristics make it ideally suited for modern operational profiles in military and law enforcement environments. Technical Specifications TypeFlash Hider InterfaceNATO A2-compatible MaterialHigh-strength steel FinishHard-coated to MIL standards FeaturesWeight-optimized cutouts, short-barrel optimized, suppressor compatible ApplicationMilitary, law enforcement, tactical use

The CLAWGEAR CG15 LOWER PARTS KIT contains all the essential components needed to assemble an AR15 lower receiver. These original CG15 parts are manufactured to Mil-Spec standards and are known for their high quality and reliability. The team at CLAWGEAR Arms ensures that all parts in the kit meet the highest standards. This kit is ideal for those who want to assemble their own AR15 lower or need spare parts. The precisely machined and durable components ensure flawless functionality and longevity. The proven quality of CLAWGEAR Arms guarantees the reliability and performance of your weapon even in the toughest conditions.  The kit includes:1x Hammer1x Hammer Spring2x Hammer Pin1x Trigger1x Trigger Spring1x Disconnector1x Disconnector Spring1x Safety Selector1x Detent for Safety1x Detent for Takedown Pin1x Magazine Catch1x Magazine Catch Spring1x Magazine Catch Button1x Front Takedown Pin1x Rear Takedown Pin2x Detent for Takedown Pin2x Takedown Pin Spring1x Bolt Catch1x Bolt Catch Roll Pin1x Bolt Catch Plunger1x Bolt Catch Spring1x Buffer Retainer Pin1x Buffer Retainer Spring1x Trigger Guard1x Trigger Guard Roll Pin1x Pistol Grip Screw1x Pistol Grip Screw Lock Washer 

The CLAWGEAR CG15 UPPER PARTS KIT contains all the essential components needed to assemble an AR15 upper. These original CG15 parts are manufactured according to Mil-Spec standards and are renowned for their high quality and reliability. The CLAWGEAR Arms team ensures that all components in the kit meet the highest standards. This kit is ideal for anyone looking to assemble their AR15 upper themselves or in need of spare parts. The precisely crafted and durable components ensure flawless function and longevity. The proven quality of CLAWGEAR Arms guarantees the reliability and functionality of your firearm, even in the toughest situations.  PARTS LIST1x Ejection port cover1x Ejection port cover spring1x Ejection port cover pin1x Forward assist1x Forward assist spring1x Forward assist roll pin 

AK47 Long Slick Handguard M-LOK The Clawgear AK47 Long Slick Handguard is the longest version in the modular series for AK platforms with stamped or milled receivers. Designed for users who require maximum accessory mounting space and extended grip options, it is ideal for precision shooting techniques and tactical applications. Machined from high-strength 6061 aluminum and MIL-SPEC Type III hard anodized, the handguard delivers exceptional durability and dimensional accuracy. Its matte, non-glare finish helps reduce unwanted reflections. The integrated M-LOK system enables secure mounting of Picatinny segments, lights, and vertical grips. A QD sling mount is integrated at the rear section. This extended-length variant provides maximum flexibility for accessory layout and modern shooting techniques without compromising weapon balance. Technical Specifications TypeFree-floating handguard PlatformAK47 (compatible with stamped and milled receivers) Material6061 aluminum, MIL-SPEC Type III hard anodized FinishMatte black, non-glare Mounting SystemM-LOK compatible Additional FeaturesQD sling attachment point (rear section) ColorBlack (hard anodized) Length383 mm Weight292 g